Are you experiencing slow your computer? Do you find yourself waiting too long to open programs or files? Are you looking for how to speed up your computer and how to speed up your computer? No need to worry! In a previous article, we talked about the 10 best programs to improve computer performance, but in this article, we will review 12 ways to speed up and improve computer performance 2024 without programs, with a focus on speeding up Windows 10 andWindows 11.
Do you want full control over your device? Command window (Run) and "CMD" are your tool! With these tools, you can perform advanced tasks such as cleaning up unnecessary files, fixing errors, and optimizing system settings. Imagine that you are a car driver, and these tools are your tools to adjust the car engine and improve its performance.
Causes of slow computer
- Accumulation of temporary files: Temporary files accumulate over time and consume space from the hard drive, affecting the speed of the device.
- Programs that run at startup: These programs consume device resources even if you don't use them.
- Hard drive full: When the hard drive is full, the performance of the device becomes much slower.
- Viruses and malware: These programs slow down the device and hinder its operations.
- Outdated drivers: Outdated drivers can cause the device to crash or slow down.
- Old operating system: Over time, the operating system may become slow and may need to be updated.
- Do not update computer software: Older versions of software may contain vulnerabilities and errors that affect device performance.
- Run multiple apps at the same time: This consumes device resources significantly, slowing down.
Stages to improve PC performance
Delete temporary files
Using the Run window:
- Press Windows + R to open the Run window.
- Type %temp% and press Enter. A window containing temporary files opens.
- Select and delete all files (you can press "Ctrl + A" to select all)
- Repeat the same step by typing temp and prefetch in the command window and deleting the existing files.
 | |
|
Using "CMD"
- Open "CMD" as administrator.
- Type del /q /f /s "%temp%*" and press Enter. This command will permanently delete all files in the temp folder.
 |
| Delete all files in the temp folder by cmd. |
By following these simple steps, you will notice a clear difference in the acceleration of your device. So, feel free to apply these procedures regularly to keep your device performing at maximum efficiency as well for more here you will find an article on the Microsoft website entitled Tips to improve your computer performance in Windows.
Important note: It is advised to be careful when using these commands, as they may result in the deletion of important unwanted files. You can browse the temp folder manually before running the command to make sure there are no important files.
Disable programs that run on startup
Using Task Manager:
- Press Ctrl + Shift + Esc to open Task Manager.
- Go to the Startup tab and disable unnecessary programs.
 |
| Covers programs that run at startup via Task Manager. |
Note: Some programs may be necessary for the system to function properly, so be sure to understand the functionality of each program before disabling it.
Using "MSConfig":
- Press Windows + R, type msconfig, and press Enter.
- Go to the Startup tab.
- Deselect the programs you don't want to run at startup.
 |
| Disable programs via MSConfig command |
Adjust performance settings
Using the Run window
- Press Windows + R, type sysdm.cpl, and press Enter.
- Go to the Advanced tab and press Settings under the Performance section.
- Choose Adjust for best performance to disable unnecessary visual effects.
 |
| Disable unnecessary visual effects. |
Using "CMD":
- Open "CMD" as administrator.
- Type powercfg /h on and press Enter. This will disable fast mode, which may increase the speed of playback.
 |
| Disable unnecessary visual effects by cmd. |
Hard Drive Cleaning
Using Disk Cleanup:
- Press Windows + R, type cleanmgr, and press Enter.
- Choose the disk you want to clean.
- Select "Downloaded Program Files", "Temporary Internet Files" and any other options you see fit.
- Click OK and then Delete Files.
 |
| Clean up unnecessary files. |
Using "CMD":
- Open "CMD" as administrator.
- Type cleanmgr /d %systemdrive% and press Enter. This command will open the Disk Cleanup tool to clean up the hard drive.
 |
| Cleaning disk and unnecessary files |
Use additional tools
- CCleaner: A free tool for removing temporary files, cleaning the browser history, and managing drivers.
- Wise Disk Cleaner: Free tool to remove unnecessary files, clean disk, and manage storage space.
Update Drivers
Using Device Manager:
- Press Windows + R and type devmgmt.msc and press Enter to open Device Manager.
- Find the devices whose drivers you want to update.
- Right-click on it and select "Update driver".
 |
| Update drivers. |
Use additional tools:
Remove unnecessary programs
Using Programs and Features:
- Press Windows + R, type appwiz.cpl, and press Enter to open the Programs and Features window.
- Find and remove programs you don't need.
 |
| Remove unnecessary programs. |
In short, removing unnecessary software can help improve your computer's performance and make it run more efficiently.
System scan for viruses and malware
Viruses and malware can slow down the device. Be sure to use antivirus software to scan the system regularly. Solving the problem of slow computer Windows 10 can be simple through virus removal.
- Run a full system scan periodically to check for any potential threats.
- Update all your software regularly, including the operating system and applications.
- Be careful when opening unknown attachments or downloading files from untrusted sources.
A system scan for viruses and malware is an essential step to keep your computer safe and performing. Following these steps will help you avoid malware-induced problems and ensure that the device works more efficiently.
Restart your computer
After you make the changes, be sure to restart your computer to apply the changes. Restoring the best performance of Windows 10 can be achieved through reboot.
Optimize power settings
Using Power Options:
- Press Windows + R, type powercfg.cpl, and press Enter to open Power Settings.
- Choose High performance to optimize device performance.
 |
| Change the power settings to "High Performance. |
Note: These settings may increase power consumption and reduce battery life.
Registry cleaning
Use performance accelerator tools
There are many tools available that can help speed up the performance of Windows 10. Programs like Advanced SystemCare and Glary Utilities can help improve performance significantly.
System Services Management
Using "services.msc":
- Press Windows + R, type services.msc, and press Enter.
- Find and disable services you don't need.
 |
| Disable unnecessary services. |
Note: Disabling some services may cause system defects. Therefore, make sure that you understand the functionality of each service before you disable it. You can search for the name of the service online to see what it does.
Clean the browser cache
- Open your browser.
- Go to your browser settings and look for the Clear browsing data or Clear cache option.
- Choose the time period and data you wish to delete and press Clear data.
Additional tips to improve PC performance:
- Update the operating system: Modern operating systems provide performance improvements and correct some errors, so it is recommended to update the operating system regularly.
- Use Defragmentation: Defragmentation can be used to arrange hard drive files increasing the speed of access.
- Using Windows 10 device cleanup commands like "chkdsk" and "sfc /scannow" can help fix errors and improve performance.
- Review browser settings: Some extensions or browser options that may consume resources can be turned off.
- Using SSD: Speeding up Windows 10 to maximum speed can be achieved through the use of SSD, as it provides much higher read and write speeds than traditional hard drive (HDD) drives.
- Increase RAM memory. This will help speed up your Windows 10 PC and enable it to run more applications at the same time. without affecting the performance of the device.
- Clean your device from dust periodically.
- Monitor the temperature of the device.
- Avoid opening many apps at the same time. This can lead to heavy device resource consumption, resulting in the device being rendered and Windows 10.
Potential risks:
- Delete files from the "temp" folder: You may inadvertently delete important junk files. It is advisable to make sure that there are no important files in the folder before deleting them.
- Disable programs on startup: Some programs necessary for the correct functioning of the system may crash. It is advisable to make sure that you understand the function of each program before disabling it.
- Disable system services: Some services that are important for the correct functioning of the system may be disrupted. It is advisable to ensure that you understand the function of each service before disabling it.